Gas Fitter Brisbane

Finding a gas fitter Brisbane homeowners and businesses can trust matters more than most trades, since gas work done poorly carries real safety risk. S&J Plumbing and Gasfitting has handled residential and commercial gas work across the city for over 20 years, covering everything from a single appliance swap to a full new gas line installation.

What We Handle

Our licensed gasfitters install, repair and service gas hot water systems, cooktops, ovens, indoor heaters and outdoor BBQs, along with fireplaces and pizza ovens for larger renovation projects. Every job is commissioned properly and backed by a certificate of compliance, so there's a clear paper trail confirming the work meets Australian standards, useful for insurance purposes as much as peace of mind.

  • Residential Gasfitting: Appliance installs, repairs and servicing for homes across Brisbane.
  • Commercial Gasfitting: Larger-scale installs and compliance work for businesses and commercial kitchens.
  • New Installations: Full gas line connections from meter to appliance, done to compliance standards.
  • Repairs & Servicing: Fixing faults, replacing worn components, and keeping existing systems running safely.

New Gas Line Connections

A new gas line is one of the more involved jobs we handle, and it's not somewhere to cut corners. Our process covers the full installation from meter to appliance, with every stage signed off before moving to the next.

  • Pipe layout & fittings: We plan the optimal route from meter or tank to each appliance, using proper materials and connectors to minimise the chance of a future leak.
  • Safe termination points: Termination fittings, height, positioning and ventilation are set according to the specific appliance being connected, not a generic standard.
  • Pressure testing: Once installed, the full line is pressure tested well above normal operating levels using nitrogen, so any weak point shows up before the system goes live.
  • Final checks: An open flame leak check is carried out as a last safety validation before any appliance is connected and switched on.

Commercial Gas Fitter Services

Beyond residential work, our team operates as a commercial gas fitter Brisbane businesses can turn to for kitchen fit-outs, industrial laundries and larger-scale gas installations.

Commercial jobs come with tighter compliance requirements and less tolerance for downtime, so we plan around trading hours wherever possible.

We handle:

  • Professional kitchen equipment
  • Industrial boilers
  • Specialised commercial hot water systems.

It's all part of the same fully-licensed service. Larger sites often need staged installation work too, and we're equipped to plan around that rather than treating every job as a single quick visit.

Emergency Gas Fitter Response

Gas leaks don't wait for convenient timing, and neither do we. We can have an emergency plumber Brisbane wide at your place 24/7, as we're always ready to respond as soon as a leak is reported.

We trace the actual source using proper detection equipment rather than guessing.

It's perfect for:

  • Faulty appliance fitting
  • Damaged pipework
  • Faults throughout your home or businesses' layout.

We implement repairs fully and quickly and re-check the surrounding area for smaller, secondary leaks before we consider the job finished. It's a thorough process by design, since a missed secondary leak defeats the purpose of the callout.

Book Your Brisbane Gas Fitter Today

Whether it's a new appliance, a full gas line install, or an urgent leak, a Brisbane gas fitter from S&J Plumbing and Gasfitting is always standing by and ready to help. As your trusty local gas fitter plumber Brisbane wide, we bring licensed, compliant work to every job - residential or commercial.

DO YOU SMELL GAS?

Evacuate first and call from a safe distance. Never attempt to relight anything or use a phone near a suspected leak.

Finding The Right Brisbane Gas Fitter

It comes down to licensing, experience and a track record you can actually verify. All gas work in Queensland must legally be carried out by a specially-licensed professional, and a licensed gas fitter Brisbane households can trust will always issue a certificate of compliance once the job's done.

Our technicians are members of the Master Plumbers Association of Queensland, and we've built our reputation over two decades on doing the job properly the first time rather than the fastest.

Local Coverage: Northside and Southside

With branches in Pinkenba and Mount Gravatt East, we operate as a gas fitter Brisbane Northside residents call for prompt service - and the same standard extends south. As a gas fitter Brisbane Southside households and businesses also rely on, we cover Coorparoo, Carina, Runcorn and surrounding suburbs with the same response times and pricing structure used across the rest of the city.

Two branches means we're rarely far from wherever the job actually is.


Frequently Asked Questions (FAQ)

What gas supply requirements should I consider before installing another appliance?

Yes, if your existing gas supply has enough capacity to meet the additional demand. For example, you might want to add a gas heater to a home that already has a gas cooktop and hot water system. Before installation, three things need to be checked:

  • Gas meter capacity: The meter must be able to supply enough gas for the existing appliances and the new heater.

  • Pipe sizing: The gas pipes must be correctly sized to deliver the required gas supply when several appliances are running.

  • LPG cylinder storage and vaporisation rate: If your home uses LPG, the cylinders must have enough storage and vaporisation capacity to meet the combined gas demand.

After the gas system installation or alteration is complete, the gas work licence holder must issue a gas system compliance certificate to the property owner immediately. They must also send a copy of the certificate to the network operator within five days.

What happens to existing gas pipes when I renovate or extend my home?

If your home uses multilayer or composite gas pipes, any alterations must comply with AS 5601.1 and the pipe manufacturer's installation instructions. There are several things to consider:

Different brands of multilayer gas pipes and fittings aren't interchangeable. Any new connections must use components approved for the existing piping system.

Existing gas pipes may not have enough capacity to supply additional appliances, as the internal pipe diameter and fittings can affect gas flow and pressure. The type of proprietary piping system used and the location of its tee connections must also be identified and recorded in the gas system compliance documentation.

If your renovation involves installing or altering underground gas pipes, your gas fitter must clearly mark and record their location on the Gas System Compliance Certificate and Gas System Compliance Plate.

Why would my existing gas pipes need upgrading when I'm only replacing an old gas stove?

If you're switching from gas to electricity, you'll need to arrange the disconnection of your household gas pipework separately from the gas meter and network supply. Let’s say, you want to replace your gas cooktop with an induction model and your gas hot water system with a heat pump. Here's who handles each part.

  • Licensed gas fitter: Disconnects the existing gas appliances, safely caps or alters the household gas pipework and completes the required gas work documentation.

  • Gas retailer: Handles your request to disconnect the natural gas supply, including any account arrangements, applicable fees and coordination with the gas distributor.

  • Gas distributor: Carries out the network-side disconnection and arranges meter removal or permanent removal of the gas service where requested and applicable.

Keep in mind that disconnecting your gas supply isn't necessarily the same as permanently removing the gas connection. Depending on the arrangement, the meter or underground service pipe may remain at your property. If you're planning major renovations or excavation, clarify whether you need a standard disconnection or permanent gas service removal before work begins.

Can I permanently remove a gas meter and supply line that I no longer use?

Yes. If you no longer use natural gas at home, you can request permanent removal of your gas connection. This is called gas abolishment, and it's different from simply disconnecting or capping the supply.

You might have an old gas cooktop that you no longer use, with the gas supply already capped at the meter. Although gas is no longer flowing to your appliances, the meter and underground service pipe may still be connected to the distribution network. You'll need to arrange the following:

Contact your gas retailer – Request a permanent gas abolishment rather than a temporary disconnection. Your retailer can coordinate the request with the gas distributor.

Arrange meter and service removal – The distributor or its authorised technicians handle the network-side work, including removing the meter and permanently isolating the gas supply.

Confirm what happens to the underground pipes – Some buried pipework may remain on your property even after the supply has been permanently isolated.

A licensed gas fitter can disconnect your old gas appliances and safely cap, alter or remove the household gas pipework. However, permanently removing the gas meter and network connection requires a separate arrangement through your gas retailer. The gas distributor or its authorised technician carries out that work.

Contact S&J Plumbing

Friendly, fast & professional plumbing services across Brisbane’s North, South & Western Suburbs.

Need A Top Brisbane Plumber Now?

The team at S&J Plumbing and Gasfitting are standing by ready to help when you need a 24 hour plumber Brisbane wide.
1300 600 508