Bathroom Plumber Brisbane

At S&J Plumbing and Gasfitting, we have extensive experience in all aspects of bathroom renovation plumbing and repairs. From a full renovation to replacing fixtures, our Brisbane bathroom plumbers can do it all!

Established experts

The Bathroom Plumber That Can Do It All

Whether you’re remodeling, renovating, or simply repairing fixtures, S&J Plumbing and Gasfitting has the expertise to handle any project – large or small. The bathroom is a crucial part of any household. Even one thing that’s not working properly can be a major problem for everyone under your roof. When something goes wrong, our local plumbers in Brisbane here to respond and get the issues resolved as fast as possible – so you get back to normal life quickly.

Installation & Repair of Bathroom Plumbing Fixtures

Leave your bathroom fixtures to us instead of struggling with DIY options. Our bathroom plumbers are highly experienced with installing and repairing everything from sink taps to leaky pipes. 

Our Brisbane bathroom plumbing services include: 

Toilet Installation & Repair

Vanity Installation

  • Tap drilling, sink cutout modifications, stone seaming
  • Drain/trap assembly, tap mounting, supply line hookups
  • Bathroom sink installation and replacement

Showers

  • Shower head replacement, adjustable arm installs, rain heads
  • Bath-to-shower conversions, steam unit installation
  • Shower drain clearance, pipe leak tests, regrouting

Pipe Installation & Repair

  • Pipe routing, pressure balancing, elbow/tee fittings
  • PEX, copper pipe, CPVC repair and replacement
  • Pipe insulation wraps, valve installation, catch basin builds

Water-Saving Retrofits

  • Low-flow showerhead/faucet aerators
  • Dual flush/low flow toilet resets
  • Instant water heater upgrades, recirculation pump installs

Hot Water Systems

  • Hot water system repair and replacement, thermostat adjust
  • Recirculating pump installation, heat tape wraps
  • Scalding prevention via tempering valves

Leaking Tap Replacement

  • Tap cartridge replacement, washer fixes, valve grinding
  • Aerator screens cleared, angle stops tightened
  • Mixer tap installation, handle/lever fixes, spout realign

Drain Clearing & Cleaning

  • Hair trap cleaning, liquid drain treatments
  • Snake augers, plunger maneuvers, p-trap disassembly
  • Shower, bath and sink drain cleaning


Whatever the issue is, call S&J Plumbing and Gasfitting for residential and commercial bathroom plumbing in Brisbane.

Signs You Need to Call a Bathroom Plumber

While some minor plumbing issues can be temporarily fixed yourself, most problems require professional skills to resolve the problem completely. 

Call our bathroom plumbers right away if you notice: 

  • Persistent blockages or very slow draining sinks/tubs/showers - Could indicate pipes need cleaning out or snaking
  • Leaks originating under sinks or around toilets - Leaks left unattended can cause water damage spreading to walls/floors
  • Shower heads dripping after shutoff or loose spout connections - Mineral buildup at fixtures may require cartridge/washer replacements
  • Running toilets with hissing interior valves - Malfunctioning flappers/fill valves waste large amounts of water
  • Low hot water pressure or varying shower temperatures - Sediment buildup in pipes can restrict flow – thermostats may need adjustment
  • Visible corrosion or rot damage on toilet bases - Damage harbours bacteria and eventually can cause leaks/equipment failure
  • Strange gurgling noises from drains/toilets - Suggests venting issues that need professional attention
  • Molded or softened grout around showers/tubs - Indicative of early leakage that allows humidity/moisture seepage

We do Bathroom Plumbing Brisbane wide!

The team at S&J Plumbing and Gasfitting are locally-owned and we do Bathrooms Brisbane wide.

What we do

More Of Our Services

1.

S&J Plumbing and Gasfitting can fix all types of blocked drains. We have the knowledge and the experience to tackle any drainage issues you may have.

2.

Plumbing

S&J Plumbing and Gasfitting provides a full range of professional plumbing services, from solving existing residential or commercial plumbing issues to installing the necessary systems in your new home.

4.

Gas Fittings

If you suspect a gas leak or need to install a new gas appliance, don't DIY it. All gas services need to be done by a licensed gasfitter.

5.

At S&J Plumbing and Gasfitting, we use the latest in CCTV Drain Camera Technology to investigate problems with your plumbing.

6.

With over 20 years of plumbing experience, the team at S&J Plumbing knows exactly how to diagnose, assess, and fix any problems that arise with the household throne.

7.

Burst Water Pipes

S&J Plumbing and Gasfitting has years of experience in the plumbing industry, including repairing and replacing broken water pipes.

8.

Whether it be emergency callouts, installations or maintenance programs, our commercial plumbers have the skills, experience and equipment to attend to your requirements.

Bathroom Plumbing FAQs

What plumbing considerations apply when adding a bathroom to the ground floor of a two-storey Brisbane home?

In a two-storey home, the upstairs bathroom may drain through vertical waste pipes that connect to the underground sanitary drainage system. The ground floor may also have limited access to existing pipes, especially if the home sits on a concrete slab.

Adding another toilet, shower and basin means connecting new fixtures to this existing plumbing. Poorly planned connections can cause slow drainage, wastewater backups, water pressure problems or unnecessary damage to floors and walls. S&J plumbers will assess existing sanitary drains, hot and cold water supply, concrete slab access, and combined sanitary drains.

What documents can you request to check that their bathroom plumbing work was completed correctly?

Ask your plumber for an invoice listing the work completed, including any new pipes, drainage connections and bathroom fixtures installed or replaced.

If the work was classified as notifiable plumbing work, request a copy of the Form 4. Check that the property address, plumber's details and description of the work match your bathroom installation.

You should also confirm that the plumber lodged the notice with the QBCC. You can check the registration details through the QBCC.

If your bathroom plumbing requires a Council permit, request the final inspection outcome and any compliance certificate issued for the approved work.

As a homeowner, you should also check the finished bathroom for visible plumbing problems. Run the shower and basin taps, flush the toilet and check that wastewater drains freely. Look for leaks around tap connections, beneath the basin and at the toilet base. Check for water pooling around the shower waste and damp patches on nearby walls or floors. If you notice any problems, ask your plumber to inspect them before signing off on the work.

What should homeowners check on a WELS label before purchasing new bathroom fixtures?

Before buying new taps, showerheads or toilets, take a look at the Water Efficiency Labelling and Standards (WELS) label. It tells you how much water each fixture uses, so you can compare different models before making a purchase. Check these details on the label:

  • Look at the number of stars. The more stars a fixture has, the more water-efficient it is compared to similar products.

  • Check how many litres of water the showerhead uses per minute (L/min). If you're buying a shower with multiple outlets, check the flow rate and rating for the combination.

  • Look at the litres per minute (L/min) for basin taps. A lower flow rate generally means the tap uses less water.

  • For dual-flush toilets, check the litres used for a full flush, half flush and average flush. For single-flush toilets, check the litres used per flush.

  • Check the company name and licence number on the label. You can use the WELS Product Register to verify the product's registration.

  • Make sure the model listed on the WELS label matches the fixture you're buying, especially when shopping online.

Our S&J plumbers can check the flow rates of your chosen taps and showerheads, compare toilet flush volumes and assess the existing water supply connections before installing your new bathroom fixtures.

Why does the bathroom smell like sewage when the toilet is flushed?

It can indicate a problem with the bathroom's drainage ventilation or a blockage in the connected sewer pipes. This can happen after a bathroom renovation if the plumbing layout has changed or the new connections have affected how air and wastewater move through the system. Two possible causes include:

  • Poor drain ventilation – Flushing the toilet sends wastewater through the drainage pipes and changes the air pressure inside them. If the venting is inadequate, the pressure change can pull water from a nearby shower, basin or floor waste trap.

  • Partial sewer blockage – A build-up inside the connected drain can restrict wastewater flow. When the toilet flushes, the moving wastewater may cause gurgling in nearby fixtures. Slow drainage, rising water levels or wastewater overflowing from an outdoor gully can also indicate a blockage.

If the smell started after a bathroom renovation, S&J Plumbers can assess the drainage connections, venting and water seals. 

What plumbing limitations can affect relocating a shower or bathtub during a bathroom renovation?

The main plumbing limitations are the location of your existing waste pipes, the available drainage fall and how easily your plumber can access the pipes beneath the bathroom floor. These factors determine how far you can move your shower or bathtub and how much plumbing work the relocation will require.

Moving a shower further away from its original drain means your plumber may need to extend or reroute the waste pipe. The new pipe must have enough fall to carry wastewater towards the sanitary drain. If there is not enough space beneath the floor to achieve this, you may need to reconsider the proposed shower location or raise the floor level.

Your bathroom's floor construction also affects the work involved. In homes with concrete slabs, moving the waste pipe may require cutting into the concrete. In apartments, some drainage connections may be located beneath the floor slab or within the ceiling space of the unit below. Accessing these pipes may require body corporate approval and coordination with the neighbouring unit.

Contact S&J Plumbing

Friendly, fast & professional plumbing services across Brisbane’s North, South & Western Suburbs.

Need A Top Brisbane Plumber Now?

The team at S&J Plumbing and Gasfitting are standing by ready to help when you need a 24 hour plumber Brisbane wide.
1300 600 508